Licensed & Insured

Call: (646) 225-1573

Brickwork, blockwork and masonry repair

Masonry Contractor in the Bronx, NY

Hatun Construction Corp. provides brickwork, blockwork, repointing, masonry repair, and facade and step improvements for homeowners, landlords and property managers. More than 10 years of hands-on construction experience supports careful exterior craftsmanship across the Bronx, with qualified projects also considered in Brooklyn and Queens.

  • Licensed & Insured
  • 10+ Years of Experience
  • English & Spanish
Residential frontage with completed brick walls, columns and masonry steps
Close view of brick courses and mortar joints beside an exterior window

Masonry Work Built for Strength, Detail and Long-Term Value

Cracked joints, loose brick, worn blockwork and water entry can result from different conditions. Hatun reviews visible units, mortar joints, surfaces, transitions and access before recommending repair, repointing or rebuilding within the proposed scope.

The company works with homeowners, landlords and property managers responsible for exterior walls, facades, entry steps and shared property areas. The final recommendations and written estimate are confirmed after the masonry and surrounding conditions are inspected.

Review
Units, joints, surfaces and access
Confirm
Repair, repointing or rebuilding scope

Masonry Problems We Help Solve

Visible deterioration needs context. Hatun reviews the affected masonry and surrounding conditions before defining a repair.

  1. Mason repairing the mortar joints at the base of a brick wall

    Deteriorated mortar joints

    Worn or cracked joints can be assessed to determine where repointing or localized repair may be appropriate.

  2. Mason kneeling with bricks during exterior masonry work

    Loose or damaged bricks

    Visible movement, breakage and surface damage should be reviewed before units are repaired or replaced.

  3. Concrete block wall under construction on a rooftop

    Aging blockwork

    Block walls can develop worn joints, cracking or surface deterioration that requires a project-specific scope.

  4. Rooftop brick work with a protective membrane against water

    Water entering through exterior surfaces

    Masonry may be one possible source of moisture, but surrounding conditions must also be considered during inspection.

  5. Exterior masonry steps beside a residential entrance

    Damaged steps

    Loose units, worn joints and damaged step surfaces can be evaluated for repair or rebuilding.

  6. Long brick facade wall along a property

    Deteriorated facades

    Visible facade wear can be reviewed according to access, affected area and the limits of the proposed work.

  7. Brick parapet edge with coping along a rooftop

    Surface cracking

    Cracks should be inspected before deciding whether the work is localized or connected to broader conditions.

  8. Rooftop masonry area being prepared for repair

    Failed previous repairs

    Mismatched or deteriorating repair areas can be evaluated without assuming the underlying cause before inspection.

  9. Brick home frontages with masonry columns and steps

    Worn exterior masonry

    Weather exposure and age can affect surfaces, joints and finishes differently across a property.

  10. Chimney brickwork being rebuilt against the sky

    Areas needing repair or rebuilding

    Cleaning, repair or selective rebuilding can be considered where the condition and project scope support it.

Masonry Services

Masonry projects can involve repair, preparation, installation and finish work. The appropriate services depend on the visible condition, access and agreed objectives for the property.

  • Brickwork
  • Blockwork
  • Repointing
  • Mortar joint repair
  • Masonry repair
  • Facade repair
  • Step repair and rebuilding
  • Small walls and exterior masonry improvements
  • Granite and finish-related work when appropriate
  • Surface preparation
  • Removal and cleanup of agreed project debris

The final masonry scope is determined after the project inspection and written estimate. Access, existing conditions and material availability may affect the recommended work and finish options.

Masonry Work for Residential and Multifamily Properties

Exterior walls, entrances, shared areas and access conditions shape how masonry work should be planned for each property. The property scenes below are illustrative examples of each setting.

  • Illustrative red brick single-family home with masonry walls and steps

    Single-family homes

    Exterior walls, steps, small walls and visible masonry concerns can be reviewed around the owner's priorities.

  • Illustrative red brick multifamily rowhouses with masonry stoops

    Multifamily properties

    Work may require coordination around shared entrances, occupied areas, access and planned maintenance.

  • Illustrative tall red brick apartment building with masonry walls

    Apartment buildings

    Facade and exterior masonry needs are evaluated according to height, access, affected area and project fit.

  • Illustrative brick condominium entrance with masonry columns

    Condominiums

    Entry, wall and shared-area improvements can be considered with applicable property coordination.

  • Illustrative small brick rental building with a masonry stoop

    Rental properties

    Landlords can discuss durable repair needs for occupied buildings, turnover work or planned improvements.

  • Illustrative brick commercial storefront with a masonry facade

    Selected commercial properties

    Appropriate projects are reviewed according to access, masonry type, scope and current capabilities.

Why Choose Hatun for Masonry Work?

Masonry craftsmanship is visible in alignment, joint work, edges and transitions. Hatun pairs attention to those details with practical assessment and direct communication.

  1. 01

    10+ years of hands-on experience

    Practical construction knowledge supports decisions about existing masonry, preparation and finish work.

  2. 02

    Licensed & Insured

    Hatun provides the professional credentials expected for construction and masonry projects.

  3. 03

    Attention to alignment and joints

    Courses, joints, edges and transitions are treated as functional details that also shape the finished appearance.

  4. 04

    Careful project assessment

    The recommended work begins with visible conditions rather than assuming every crack needs the same response.

  5. 05

    Clear estimates and communication

    The proposed scope, access considerations and finish expectations are discussed before work proceeds.

  6. 06

    English and Spanish service

    Owners and managers can discuss masonry concerns and next steps in English or Spanish.

Close view of brick facade courses and finished mortar joints

Our Masonry Process

The sequence connects the observed condition to a written scope, careful execution and a final review of the agreed work.

  1. 01

    Request an Estimate

    Share the affected area, visible condition, property type and photographs when they are available.

  2. 02

    Masonry Inspection

    The team reviews accessible units, joints, surfaces, transitions and the area around the proposed work.

  3. 03

    Findings and Recommended Scope

    Observed conditions and the recommended repair, repointing or rebuilding work are defined in writing.

  4. 04

    Repair, Repointing or Installation

    Approved work proceeds according to the agreed scope, access and site conditions.

  5. 05

    Final Review and Cleanup

    Completed joints, surfaces and finishes are reviewed, followed by the agreed project cleanup.

Masonry Services Across the Bronx, Brooklyn and Queens

Hatun operates as a service-area business with the Bronx as its primary masonry market. Project availability in Brooklyn and Queens is confirmed according to location, access, scope and current scheduling.

Brooklyn, NY

Qualified masonry projects are considered after the affected area, access and proposed scope are reviewed.

Queens, NY

Property owners can contact Hatun to discuss visible masonry concerns and current availability.

Workmanship commitment

We Stand Behind Our Work

If a problem comes up as a direct result of work completed by Hatun Construction Corp., the company will inspect the work and make the necessary corrections according to the agreed project scope and terms.

The commitment applies to direct workmanship concerns within the agreed scope and terms. It does not extend to movement, settlement, unrelated water sources, existing structural conditions, natural wear or third-party damage.

Masonry Questions

These answers explain common masonry considerations. The actual condition, access and material availability still require review.

What masonry services does Hatun Construction Corp. provide?

Services may include brickwork, blockwork, repointing, mortar joint repair, masonry repair, facade work, steps and small exterior masonry improvements. The exact scope follows inspection.

What is repointing?

Repointing removes deteriorated mortar from masonry joints and replaces it with new mortar where appropriate. The existing joints and units must be reviewed before the work is defined.

How do I know whether brickwork needs repair?

Loose units, open or worn joints, cracking and visible deterioration can indicate a need for inspection. The appropriate repair depends on the observed condition and surrounding work.

Can damaged mortar allow water into a property?

Deteriorated joints can be one possible path for moisture, but roofing, flashing, openings and other conditions may also contribute. An inspection is needed before identifying the scope.

Can you repair masonry steps?

Step repair or rebuilding may be included when the existing condition, access and proposed scope are appropriate for the project.

Can new masonry match existing brick or stone?

A reasonable visual match can be pursued, but an exact match depends on the age, condition and availability of compatible materials. Expectations should be reviewed before work begins.

How long does masonry work usually take?

Timing depends on scope, access, material availability, weather and existing conditions. A useful schedule can be discussed after inspection and planning.

Do you work with landlords and property managers?

Yes. Hatun works with landlords and property managers responsible for rental, apartment and multifamily property improvements.

How do I request an estimate?

Use the Request a Free Estimate button or call (646) 225-1573. Share the affected area, visible condition, property type and general location to begin the review.

Start with the affected area

Need Masonry Repair or New Brickwork?

Tell Hatun what area is affected, what signs you have noticed, the type of property and its general location. Photographs can also be discussed during direct follow-up when useful.

Call NowFree Estimate